Brief Introduction of 1. Compressed Garbage Truck

The compressed garbage truck adopts the technology of electromechanical and hydraulic integration, and with the help of the combined automatic control system of machine, electricity and hydraulic, through the special devices such as carriage, filler and shovel, the garbage can be poured, crushed or flattened, and loaded forcefully, and the garbage can be squeezed into the carriage and compacted and unloaded. Its main features are that the garbage collection method is simple and efficient, with automatic repeated compression and peristaltic compression functions, high compression ratio, large loading quality, automatic operation, good power and environmental protection, and high vehicle utilization efficiency.

2. compression garbage truck function introduction

The compressed garbage truck, also known as the rear-loading compressed garbage truck, is a new type of sanitation vehicle that collects and transfers garbage to avoid secondary pollution. The after-loading filler is connected with the garbage can or the garbage bucket, and combined into a mobile garbage transfer station, so as to realize the pollution-free circulation collection and transportation of one truck and multiple buckets of garbage. It effectively prevents the secondary pollution caused by the scattering and flying in the process of collection and transportation.

Combined control of gas, electricity and hydraulic pressure. The control system of the car makes comprehensive use of the advantages of electronic control, pneumatic control and hydraulic control. The pneumatic control system is controlled by the electronic control system, and then the hydraulic valve group is controlled by the pneumatic control system, which improves the reliability and efficiency of use.

Advanced electronic control system. Using CAN (programmable controller) integrated control, the control circuit is generated in CAN, and the logic circuit is used to ensure that the operation instructions are executed in sequence, and at the same time, it ensures that the operation instructions are interlocked. Only the external line is connected, which reduces the failure rate, avoids accidents caused by misoperation and improves reliability;

Hydraulic lifting safety circuit. In the hydraulic system of the lift filler, a one-way balancing valve is provided. The valve not only ensures the smooth descent of the filler, but also cut off the direct connection between the lifting cylinder and the hydraulic oil pipe. Even if the oil pipe bursts, the filler will not suddenly fall down, thus improving the safety of use.

The compressed garbage truck is in a closed state during the process of compression filling and transportation. A unique drain valve is installed on the sewage tank, which is reliably sealed and not easy to be blocked. The optional filler completely covers the filler feeding port, eliminating the phenomenon of dust flying caused by the disturbance of the rear air flow during the transfer process, and the appearance is more beautiful.

3. product configuration:

Announcement Parameters

Detailed structure of 6. compressed garbage truck

	Filling mechanism The filling and pressing mechanism is composed of sliding plate, scraper and other components, and the garbage in the hopper is pressed into the box body through the sliding of the sliding plate and the rotation of the scraper. Each component of linkage operation adopts a beam plate or box structure with good force, with firm structure and light weight. The hopper of the filler adopts wear-resistant high-strength steel, which has good wear resistance and improves the service life. A sewage tank is installed under the filler to prevent secondary pollution.
	Presser Lifting Mechanism The lifting device of the pressure filling mechanism adopts a hydraulic lifting safety circuit. A one-way balancing valve is set on the lifting cylinder in the hydraulic system. The valve blocks the direct connection between the lifting cylinder and the hydraulic hose, even if the oil pipe bursts., The filler will not suddenly fall down and cause a vicious accident, which improves the safety of use.
	automatic control system The operation in the cab is integrated with the front and rear liquid and electricity control, and the imported PLC (programmable controller) is adopted for integrated control. The logic circuit is set to ensure that the operation instructions are executed in sequence, thus realizing the automatic cycle work of the skateboard and scraper.
	Feeding device Different users can choose and install different bucket (bucket) mechanisms according to different garbage collection methods: bucket-hanging type turnover (iron bucket, plastic garbage bin, etc.), dustpan bucket type turnover, swing arm type turnover (floor bucket can be equipped) mechanism, etc.

Vehicle warranty conditions and items

1. Chassis section
For chassis services, users should follow the requirements of the chassis manufacturer's quality assurance manual and go to the local chassis manufacturer's service station for running in maintenance and mileage maintenance. The maintenance conditions and items should be carried out according to the chassis manufacturer's regulations. If there is a problem, you can go to the chassis service station for maintenance with a valid quality warranty manual (which has undergone maintenance and mileage maintenance according to regulations and stamped with the service station seal). If quality problems occur due to failure to go to the chassis manufacturer's service station for running in maintenance and mileage warranty, the consequences shall be borne by the user themselves
2. Modification section
If the modified parts (tank installation, hydraulic system) are damaged due to product quality issues within one year from the date of purchase by the user, free warranty will be provided (except for special provisions below).
(1) Hydraulic oil filter element, 0-type sealing ring and other consumables are not within the scope of free warranty.
(2) Free six-month warranty for operating flexible axles and tugboats.
(3) For products outside the warranty period, you can contact the nearest office or service station, and all costs will be borne by the user.
(4) For the parts that have undergone quality warranty, repair is the main focus, and for those that cannot be repaired, the smallest unit of damaged parts should be replaced to solve the problem.
(5) Products that have not undergone normal maintenance and upkeep will not be covered by warranty if they malfunction.
3. Service Commitment
(1) Promise to provide users with a clear response on the same day as receiving service information from them.
(2) For the modification part, if it is deemed necessary to provide on-site service to the user, we promise to arrive at the user's site within 24 hours within 500 kilometers (from various service stations, the same below). 500-1000 kilometers, arrive within 36 hours.
(3) The main methods of conducting a user visit once every 3 to 6 months after using the product are telephone access, communication access, and on-site visits by personnel.
(4) We will provide training to users on the operation, maintenance, and precautions of the modified parts.

The company is a car modification enterprise licensed by the Ministry of Industry and Information Technology. It was established in April 2013 and is located in Zengdu Economic Development Zone, Suizhou City, Hubei Province, the hometown of Yan Emperor Shennong and the hometown of ancient music and bells. The company mainly engages in the research and manufacturing of various special vehicles and automotive parts. The leading products include various specialized vehicles such as concrete mixer truck series, sanitation truck series, box type transport truck series, flatbed truck series, etc. The company is registered with the Ministry of Industry and Information Technology, has the qualification for vehicle design and manufacturing, the trademark is "Huadao" brand, and the announcement code is "LTC". The company has established a sound quality system and 3C quality system. The product qualification rate reaches over 99.5%.