Welcome to Hubei Liute Heavy Industry Machinery Manufacturing Co., Ltd. Official website
PRODUCTS CENTER
Western Sahara Sinotruk HOWO Concrete Mixer Truck
Category:
Product Description
The concrete mixer truck is to transport theconcrete from the pumping station to theconstruction site. During the transportationprocess, the mixer drum will always be keptrotating to ensure that the carried concretewill not solidify.
The concrete mixer truck is mainly composed of the chassis and the upper part, which can be simply divided into: chassis system, hydraulic transmission system, mixing tank body, discharging system, cleaning system, sub-frame, control system, support wheel system, and feed The system and circuit system are composed of ten parts.
1. Chassis system: the main component of the mixer truck, the transportation function of the whole concrete mixer truck is realized by the chassis.
2. Hydraulic transmission system: The engine power taken out by the power take-off is converted into hydraulic energy (displacement and pressure), and then output into mechanical energy (speed and torque) by the motor to provide power for the rotation of the mixing drum.
3. Mixing tank body: mixing drum is the key component of the whole mixing truck, is the container of concrete storage, to prevent concrete curing, segregation plays a decisive role. There are blades inside the tank, which mainly play the role of stirring and guiding materials.
4. Discharging system: it is mainly composed of main discharge chute, auxiliary discharge chute, locking rod, etc. The auxiliary discharge chute plays the role of extending the length of the main discharge chute.
5. Cleaning system: The cleaning system is mainly composed of pressure water tank, water gun, water pipe, valve, etc. Air pressure water supply is adopted, and the main function is to flush the hopper after loading and the mixing cylinder and discharge tank after discharging to prevent concrete from bonding.
6. Sub-frame: The sub-frame of the mixer truck is the main load-bearing part, and the load during operation is almost always supported by it and then transmitted to the chassis. The subframe also plays a role in alleviating the impact load formed by road bumps and deceleration. The whole sub-frame is composed of main beam, front support frame and back support frame.
7. Control system: The operating system is composed of controller, linkage shaft, flexible shaft and linkage mechanism, which mainly controls the speed and rotation direction of the mixing drum.
8. Supporting wheel system: the part where the rear of the mixing tank is connected with the sub-frame, which mainly supports the roller body.
9. Feeding system: mainly by the feed hopper and bracket composition, feed hopper due to impact wear is larger, the material requirements of good wear resistance, the bracket to play a role in reducing the impact.
10. Circuit system: mainly refers to the entire circuit of the mixer truck, including the taillights, side marker lights, gallery lights, cooling fan motors, etc.
: next page
Welcome to leave a message, we will contact you in time!
Copyright©Hubei Liute Heavy Industry Machinery Manufacturing Co., Ltd.