Welcome to Hubei Liute Heavy Industry Machinery Manufacturing Co., Ltd. Official website
PRODUCTS CENTER
Island D9 compression garbage truck
Product Description
Brief Introduction of 1. Compressed Garbage Truck
The compressed garbage truck adopts the technology of electromechanical and hydraulic integration, and with the help of the combined automatic control system of machine, electricity and hydraulic, through the special devices such as carriage, filler and shovel, the garbage can be poured, crushed or flattened, and loaded forcefully, and the garbage can be squeezed into the carriage and compacted and unloaded. Its main features are that the garbage collection method is simple and efficient, with automatic repeated compression and peristaltic compression functions, high compression ratio, large loading quality, automatic operation, good power and environmental protection, and high vehicle utilization efficiency.
2. compression garbage truck function introduction
The compressed garbage truck, also known as the rear-loading compressed garbage truck, is a new type of sanitation vehicle that collects and transfers garbage to avoid secondary pollution. The after-loading filler is connected with the garbage can or the garbage bucket, and combined into a mobile garbage transfer station, so as to realize the pollution-free circulation collection and transportation of one truck and multiple buckets of garbage. It effectively prevents the secondary pollution caused by the scattering and flying in the process of collection and transportation.
Combined control of gas, electricity and hydraulic pressure. The control system of the car makes comprehensive use of the advantages of electronic control, pneumatic control and hydraulic control. The pneumatic control system is controlled by the electronic control system, and then the hydraulic valve group is controlled by the pneumatic control system, which improves the reliability and efficiency of use.
Advanced electronic control system. Using CAN (programmable controller) integrated control, the control circuit is generated in CAN, and the logic circuit is used to ensure that the operation instructions are executed in sequence, and at the same time, it ensures that the operation instructions are interlocked. Only the external line is connected, which reduces the failure rate, avoids accidents caused by misoperation and improves reliability;
Hydraulic lifting safety circuit. In the hydraulic system of the lift filler, a one-way balancing valve is provided. The valve not only ensures the smooth descent of the filler, but also cut off the direct connection between the lifting cylinder and the hydraulic oil pipe. Even if the oil pipe bursts, the filler will not suddenly fall down, thus improving the safety of use.
The compressed garbage truck is in a closed state during the process of compression filling and transportation. A unique drain valve is installed on the sewage tank, which is reliably sealed and not easy to be blocked. The optional filler completely covers the filler feeding port, eliminating the phenomenon of dust flying caused by the disturbance of the rear air flow during the transfer process, and the appearance is more beautiful.
3. product configuration:
Compressed garbage truck loading configuration parameters | |||
Vehicle model | CLW5181ZYS6 | Compression mode | bidirectional compression |
Box volume | 10 square | curb weight | 10500kg |
Packing volume | 1 square | Rated mass | 7370,7305kg |
Vehicle size | 7960*2500*3250mm | Total mass | 18000kg |
Box material | Manganese steel plate | Other | - |
Parameters of compressed garbage truck chassis | |||
Chassis model | EQ1185LJ9CDE | Engine Model | YCS04200-68(147 kW) |
Gearbox | 8-speed gearbox | Engine power | Yuchai 200 horsepower |
Wheelbase | 3950mm | Tires | 275/80R22.5 18PR tires |
Air conditioning | Yes | Other | ABC, electric glass, dynamic |
Jiashan power take-off, the box body is made of manganese steel, the rear arc plate and scraper are made of high-strength steel, Changyuan (Type 80) pump, Zhongmei multi-way valve, Hypris oil cylinder, rear turnover (120/240/660 litre garbage can) and tail sewage tank. | |||
Announcement Parameters
Vehicle technical parameters] | |||
Product trademark | Announcement Batch | ||
Product Name | Product Model | ||
Total mass (Kg) | Tank volume (m3) |
| |
Rated load mass (Kg) | Overall dimension (mm) | ||
curb weight (Kg) | Cargo compartment size (mm) |
| |
Rated passenger capacity (person) |
| Total mass of quasi-trailer (Kg) |
|
Number of permitted passengers in the cab (person) | Maximum load mass of saddle (Kg) |
| |
Approach angle/departure angle (°) | Front suspension/rear suspension (mm) | ||
Axle load (Kg) | Maximum speed (Km/h) | ||
Remarks | Special device: box, mainly used for urban sanitation garbage collection and transportation. ABS system manufacturer, model: Jiaozuo Borek Control Technology Co., Ltd., J ABS. Protective material: Q235A carbon steel, connection mode: the left and right side guards are welded to the auxiliary beam, the rear guard is replaced by a special device, and the height of the rear special device from the ground is (mm):450. The corresponding relationship between the adopted engine model and the fuel consumption value is (L/100km): B6.2NS6B210/26.3,CY4SK761/26.8,D4.0NS6B195/26.6,D4.5NS6B220/26.6,YCS04200-68/26.4.B6.2NS6B230/26.1. Installation of tachograph with satellite positioning. Select wheelbase (mm)4500,3950. Vehicle length/wheelbase/rear overhang/rear extension (corresponding relationship (mm):8650/4500/2460/430,8650/4500/2890/0;7960/3950/2170/580,7960/3950/2550/200,7960/3950/2450/300. Optional rear flip style and top style. | ||
【Chassis Technologyparameter]] | |||
Chassis model | Chassis name | ||
Trademark Name | production enterprise | ||
Number of axes | Number of tires | ||
Wheelbase (mm) | |||
Tire specifications | |||
Number of leaf springs | Front track (mm) | ||
Type of fuel | Rear track (mm) | ||
Emission basis standard | |||
Engine Model | engine production enterprise | Displacement (ml) | Power (Kw) |
B6.2NS6B210 D4.5NS6B220 D4.0NS6B195 YCS04200-68 CY4SK761 B6.2NS6B230 YCY30165-60 | Dongfeng Cummins Engine Co., Ltd Dongfeng Cummins Engine Co., Ltd Dongfeng Cummins Engine Co., Ltd Guangxi Yuchai Machinery Co., Ltd. Dongfeng Chaoyang Chaochai Power Co., Ltd. Dongfeng Cummins Engine Co., Ltd Guangxi Yuchai Machinery Co., Ltd. | 4500 4000 4156 4087 6200 2970 | 162 143 147 145 169 121 |
Detailed structure of 6. compressed garbage truck
 | Filling mechanism The filling and pressing mechanism is composed of sliding plate, scraper and other components, and the garbage in the hopper is pressed into the box body through the sliding of the sliding plate and the rotation of the scraper. Each component of linkage operation adopts a beam plate or box structure with good force, with firm structure and light weight. The hopper of the filler adopts wear-resistant high-strength steel, which has good wear resistance and improves the service life. A sewage tank is installed under the filler to prevent secondary pollution. |
 | Presser Lifting Mechanism The lifting device of the pressure filling mechanism adopts a hydraulic lifting safety circuit. A one-way balancing valve is set on the lifting cylinder in the hydraulic system. The valve blocks the direct connection between the lifting cylinder and the hydraulic hose, even if the oil pipe bursts., The filler will not suddenly fall down and cause a vicious accident, which improves the safety of use. |
 | automatic control system The operation in the cab is integrated with the front and rear liquid and electricity control, and the imported PLC (programmable controller) is adopted for integrated control. The logic circuit is set to ensure that the operation instructions are executed in sequence, thus realizing the automatic cycle work of the skateboard and scraper. |
 | Feeding device Different users can choose and install different bucket (bucket) mechanisms according to different garbage collection methods: bucket-hanging type turnover (iron bucket, plastic garbage bin, etc.), dustpan bucket type turnover, swing arm type turnover (floor bucket can be equipped) mechanism, etc. |
Welcome to leave a message, we will contact you in time!
Copyright©Hubei Liute Heavy Industry Machinery Manufacturing Co., Ltd.