Welcome to Hubei Liute Heavy Industry Machinery Manufacturing Co., Ltd. Official website
PRODUCTS CENTER
Ghana Shacman Automobile F3000 Rear Eight-Wheel Mixer Truck
Category:
Product Description
The concrete mixer truck mainly consists of a chassis and an upper assembly, which can be simply divided into ten parts: chassis system, hydraulic transmission system, mixing tank, discharge system, cleaning system, sub-frame, control system, support wheel system, feeding system, and circuit system.
1. Chassis system: The main component of the mixer truck, the entire transportation function of the concrete mixer truck is realized by the chassis.
2. Hydraulic transmission system: Converts the engine power extracted by the power take-off into hydraulic energy (displacement and pressure), which is then output as mechanical energy (speed and torque) by the motor, providing power for the rotation of the mixing drum.
3. Mixing tank: The mixing drum is the key component of the entire mixing transport vehicle, serving as a container for storing concrete and playing a decisive role in preventing concrete from solidifying and segregating. The interior of the tank has blades that mainly serve the functions of mixing and guiding the material.
4. Discharge system: Mainly consists of the main discharge trough, auxiliary discharge trough, locking rod, etc. The auxiliary discharge trough serves to extend the length of the main discharge trough.
5. Cleaning system: The cleaning system mainly consists of a pressure water tank, water gun, water pipe, valve, etc. It uses air pressure for water supply, mainly to wash the hopper after loading and to wash the mixing drum and discharge trough after discharging, preventing concrete adhesion.
6. Sub-frame: The sub-frame of the mixer truck is the main load-bearing part, and almost all the load during operation is supported by it and transmitted to the chassis. The sub-frame also helps to alleviate the impact load caused by road bumps and deceleration. The entire sub-frame consists of the main beam, front support frame, and rear support frame.
7. Control system: The control system consists of a controller, linkage shaft, flexible shaft, and connecting rod mechanism, mainly controlling the speed and rotation direction of the mixing drum.
8. Support wheel system: The part where the rear of the mixing tank connects to the sub-frame, mainly serving to support the drum body.
9. Feeding system: Mainly consists of the feeding hopper and support frame. The feeding hopper is subject to significant impact wear, so the material is required to have good wear resistance, and the support frame should help reduce the impact force.
10. Circuit system: Refers to the entire circuit of the mixer truck, including the tail lights, side marker lights, display lights, cooling fan motor, etc.
Welcome to leave a message, we will contact you in time!
Copyright©Hubei Liute Heavy Industry Machinery Manufacturing Co., Ltd.